● Voltages: 100-120V, 220-240VV
● Charging Time: 180 - 240 mins
● Run Time: 100 mins

For a better cleaning experience, we recommend replacing the accessories once every 2-3 months.You can contact us to place an order directly here.

This is a magnetic strip that prevents the robot from crossing the boundaries and the robot automatically avoids it as it approaches it. You can put it on the stairs or wherever you don't want it to pass.
Usage:
1. Measure and cut Magnetic Stripe to your desired length.
2. Firmly place Magnetic Stripe on the ground to create a barrier.
3. Vacuum Cleaner will not pass over the Magnetic Stripe.

1. Make sure the main power switch is in the ON position.
2. Make sure the battery is fully charged.
3. Replace the batteries (2 AAA) in the remote control.
4. Make sure the remote control is within range (16 ft/5 m) of robot.
5. If you still have trouble, turn off the main power switch, wait then turn it back on. If these suggestions don't help, please contact us at support@bagotte.com for more assistance.

1. Make sure the main power switch on the bottom of robot is turned on.
2. Make sure the time, time of day (AM/PM), and the scheduled time have been set correctly.
3. Check if robot’s power is too low to start cleaning.